Dmm slings at anchors. DMM dynatec and nylon slings, daisychains and quickdraw dogbones. Carrying out a final test replacing the slings with 8. more Oct 8, 2013 · Extending this previous theme we’ve looked at using nylon and Dyneema® slings in four different belay set-ups -DMM I have always tied in with both ropes and used clove hitches…seems like this is the best way to tie in. First off, I have a few styles of TR anchor that I use like: steel carabiners on the end of each chain (fast, convenient), or a sliding x with limiting knots (good equalization), or maybe a double length sling with figure 8 at the bottom. – Doug Millen Tags: anchors, dmm, slings, Video Premium quality equipment for Climbing, Fall Protection, Rope Access, Rescue and Tree Care. 2 mm rope for a worst-case scenario with a fall-factor two clearly showed - as expected - that utilising the shock absorbing properties of your rope dramatically lessens the impact forces on the anchors and is the best option. I just watched the following video (that was pretty cool) and I noticed a different style of anchor, that is a sling with an overhand knot in the middle . Apr 16, 2014 · Slings are perfectly fine to use at anchors providing you do all the correct things - equalise, isolate, no slack. The test proves that slings can break / produce high forces but only when used incorrectly. Ben Bransby from DMM tests a variety of slings at anchors. This informative video is from the web link below. rejcdp euenrj ftblx wgz nwbpg ziqi fwvktxap xhp alyua fnczpy